Search found 9 matches

by dobeluvr
Wed Sep 07, 2011 6:19 pm
Forum: General Discussion
Topic: widgets and hmi
Replies: 4
Views: 3733

widgets and hmi

What does "The image must be accessible by browser, not stored locally for security reasons." mean? Does it mean the images cannot be stored on my computer or does locally refer to be bcs?
by dobeluvr
Fri Aug 26, 2011 1:57 pm
Forum: BCS Programming
Topic: hysteresis vs differental
Replies: 6
Views: 7456

Re: hysteresis vs differental

so nobody knows if it is used the same or not?
by dobeluvr
Sun Aug 21, 2011 1:05 pm
Forum: BCS Programming
Topic: hysteresis vs differental
Replies: 6
Views: 7456

hysteresis vs differental

I see in ver 3.4.2 differential control is replaced with hysteresis control.. Is this used and programmed the same way? My fermenter was controlled simply by differential controlled with a 2 degress offset (or whatever it is called) ie if i set it at 50 it would turn on at 52 and off at 48. Does hys...
by dobeluvr
Thu Sep 23, 2010 2:26 pm
Forum: Troubleshooting and Support
Topic: how is procforce at startup supposed to work?
Replies: 6
Views: 3889

Re: how is procforce at startup supposed to work?

"Which timer was running away, and which state was it stuck in?" Timer0 was counting down from 15 minutes, would hit 0 then restart counting down again (i assume it advanced to state1 seen temperature was low, then exited to state0 as it should have and continued counting However, it must ...
by dobeluvr
Wed Sep 22, 2010 4:48 pm
Forum: Troubleshooting and Support
Topic: how is procforce at startup supposed to work?
Replies: 6
Views: 3889

Re: how is procforce at startup supposed to work?

I also notice that under the edit process tab, select state0, in the current state tables box output 4 has a check mark under directly controlled on/off, I try to clear it select apply, but it just comes back. The control box is not checked.
by dobeluvr
Wed Sep 22, 2010 4:37 pm
Forum: Troubleshooting and Support
Topic: how is procforce at startup supposed to work?
Replies: 6
Views: 3889

how is procforce at startup supposed to work?

Is it supposed to run the process or just force the output on? My program for a fermenter, The first two states should loop and just check temp every 15 min. If it determines temp > 50 starts output 4 (in deferential mode set at 50) compressor till temp <=48 at which time it should turn off compress...
by dobeluvr
Thu Jul 29, 2010 7:19 pm
Forum: BCS Expansion Cards
Topic: Do you have an idea for an Expansion Card?
Replies: 7
Views: 17284

Re: Do you have an idea for an Expansion Card?

I used 8 inputs and only 4 outs. I have 14 more outputs I could still use, but no more inputs. It just seems limiting to not be able to get more inputs than outs. (don't know the manufacturing costs or coding etc, it may just be too cost restrictive). A person might want inputs for 1)auto or 2)on, 3...
by dobeluvr
Thu Jul 29, 2010 2:20 pm
Forum: BCS Expansion Cards
Topic: Do you have an idea for an Expansion Card?
Replies: 7
Views: 17284

Re: Do you have an idea for an Expansion Card?

The Bcs460 has 6 discrete outs and 4 discrete ins. The digi16 has 12 outs and 4 ins. Total is 18 outs and only 8 ins. between the two cards. So I would be interested in more inputs on a card. It could possible be a card solely for din's, or the reverse of the digi16 with 4 outs and 12 ins.