Search found 24 matches

by jayw
Wed May 18, 2022 6:19 am
Forum: Troubleshooting and Support
Topic: 192.***.*.5 Backup and Restore IP Address
Replies: 7
Views: 217

Re: 192.***.*.5 Backup and Restore IP Address

Following up on previous posts...
JonW
Just wanted to let you know that I was able to get the BCS462 to load on my PC by using FOXFIRE. Attempted to use Chrome and Microsoft Edge again. neither one will load the program.
Thanks for the tip to use Firfox.
OldGeezer84
JayW
by jayw
Mon May 16, 2022 5:12 pm
Forum: Troubleshooting and Support
Topic: 192.***.*.5 Backup and Restore IP Address
Replies: 7
Views: 217

Re: 192.***.*.5 Backup and Restore IP Address

One More Thing... I had attempted to set a Static IP using Settings> Networking>Update Network Settings - Replaced Static IP with my current IP which I know is the correct one. These settings take effect only when DHCP is disabled. Disabled the DHCP per this note in Update Network Settings. Immedia...
by jayw
Mon May 16, 2022 11:35 am
Forum: Troubleshooting and Support
Topic: 192.***.*.5 Backup and Restore IP Address
Replies: 7
Views: 217

Re: 192.***.*.5 Backup and Restore IP Address

JonW... I know what the current IP address is and it is not the one that ends with a .5 and I have never used a .5 IP address to talk to the BCS. I can load the BCS desktop on either of my PCs (Brewery or Residence) with the current IP that I found on the Router Device list. My problem is getting th...
by jayw
Sun May 15, 2022 4:55 pm
Forum: Troubleshooting and Support
Topic: 192.***.*.5 Backup and Restore IP Address
Replies: 7
Views: 217

Re: 192.***.*.5 Backup and Restore IP Address

I might add that I just received this unit back from Brewers Hardware to be checked and flashed with the latest firmware version. If somebody knows where this *5 last digit in the IP address is hiding on my system, either the BCS or my PC Let me know, Competitions are now being scheduled and I would...
by jayw
Sun May 15, 2022 4:45 pm
Forum: Troubleshooting and Support
Topic: 192.***.*.5 Backup and Restore IP Address
Replies: 7
Views: 217

192.***.*.5 Backup and Restore IP Address

192.***.*.5 Backup and Restore IP Address... BTW... this IP address was never used to talk to the BCS. My IP address for this BCS was and has always been 192.***.*.67 This is not the existing IP address of the BCS462 on my network. I read the posts and replies during April 2020 and nothing there mak...
by jayw
Fri Jun 18, 2021 7:14 am
Forum: Troubleshooting and Support
Topic: Troubleshooting and Support
Replies: 0
Views: 2343

Troubleshooting and Support

Getting old and my eyes started to fail me, so replaced the old All-in-One PC with one that has a larger Monitor. When I transferred all content from the old PC to the new one it did not move Finder App. No problem, just need to download it from ECC Forum and load it, yell right, didn't work. Keeps ...
by jayw
Mon Aug 15, 2016 4:20 pm
Forum: Troubleshooting and Support
Topic: Alarm Buzzer/Ladder Logic
Replies: 8
Views: 4143

Re: Alarm Buzzer/Ladder Logic

JonW - Brahn, Sorry about not replying to your posts a month ago. I was able to figure out why I was getting the Alarm Buzzer tone whenever I attempted to Start a Process/State. After a lot of reading through various posts within the Forum, I found a post somewhere that said do not set an Alarm when...
by jayw
Fri Jul 15, 2016 8:04 am
Forum: Troubleshooting and Support
Topic: Alarm Buzzer/Ladder Logic
Replies: 8
Views: 4143

Alarm Buzzer/Ladder Logic

The attachments to this post show my existing Ladder Logic using Reg10 to rest Alarm and the wiring of the NO momentary push button. Does not work, why? When I attempt to start any Processes or State the alarm sounds, nothing will deactivate it, except, All Stop or Pause. Anyone see the problem with...
by jayw
Thu May 19, 2016 5:29 pm
Forum: Wiring, Electrical, Relays and Sensors
Topic: Help - over sourcing mA limits of 462
Replies: 12
Views: 5937

Re: Help - over sourcing mA limits of 462

The duplicate image in my last post was suppose to be one of the Control Panel cover, without the LEDs lite.
It is hard to make out the piping diagram in the previous panel cover witrh the LEDs lite.
Cover without LEDs lite.
Cover without LEDs lite.
Control Panel Cover.jpg (116.19 KiB) Viewed 1973 times
by jayw
Wed May 18, 2016 7:30 pm
Forum: Wiring, Electrical, Relays and Sensors
Topic: Help - over sourcing mA limits of 462
Replies: 12
Views: 5937

Re: Help - over sourcing mA limits of 462

JonW oakbarn, Thanks again for your assistance with my problem. Which started with my attempting to provide power to the Mechanical Relays in my system from the 462. Mistaken belief, if I used SSR Boards that problem would go away. Not so, SSR leakage as JonW suggests created another problem, especi...