ECC Forum

Insane international shipping charges, unfortunately.

Or maybe this one - more expensive, but with a high-temperature lead and calibration data :

http://cgi.ebay.fr/NTC10k-Kabel-Tempera ... 4a979a94d2

This is what I think I'll get :

http://www.ebay.com/itm/NTC-10K-1-tempe ... 4887926828

Hi

I'm still interested in the make and model of the thermistor used in the probe, and/or if you can supply them naked.

Thanks in advance

Mark

I'd like to be able to save and restore all the settings and processes to and from a single file...

"interface crash" = no ping but controller still running processes. "it sometimes forgets how to save changed settings"? = hit apply, screen refreshes with old values. After power cycled, applied changes accepted as normal What firmware version are you on? = BCS-460 v3.4.3 Hardwi...

iTerm would ideally be proportional to the target temperature - it takes more i to maintain 77°C than 50°C. dTerm would ideally be blocked from increasing heat output when the temperature is above the set-point - a negative change above the set-point sees dTerm increasing the output when one least w...

Is there a way to recover from an interface crash without cycling the power on the ebs 460 ?

Also, sometimes it forgets how to save changed settings, and the power needs to be cycled to restore this functionality.

Apparently, the timers of running processes stop sometimes when system settings are updated.

Regards

Mark

Hi

What's the exact make and model of the the thermistor used in the probes you supply, please?

Can you supply the naked thermistor?

I'd like to make my own probe without the well.

Thanks in advance

Mark