Search found 700 matches

by oakbarn
Thu Feb 15, 2018 9:44 am
Forum: PC / Mac Apps
Topic: My version of the HMI builder
Replies: 86
Views: 4154

Re: My version of the HMI builder

I was having an issue with a DIN and I thought it was me as it had worked fine before. I redid all mine and I was having trouble with the DiIN as well. Did not report as I thought it was as me. I am away as well and cannot test any fix
by oakbarn
Mon Feb 12, 2018 2:42 pm
Forum: General Discussion
Topic: Availability of BCS 462
Replies: 9
Views: 213

Re: Availability of BCS 462

I would like to know what the new functionality is as well and if it could just be swapped in for a 462? Excellent question: 1. Portability of Backup 2. API Calls 3. Wiring Differences to DINs, OUT (SSRs) and Probes? 4. Control Voltage 5. # of Outputs and # PWM 6. # of DINs 7. Temp Probe # (Type an...
by oakbarn
Thu Feb 08, 2018 6:33 am
Forum: Troubleshooting and Support
Topic: Low Output Voltage
Replies: 2
Views: 47

Re: Low Output Voltage

If you are getting. 6.2 on the Pins of the Wall wart、I understand there is an on board 5 volt regulator that may be able to be changed by Brewe Hardware
by oakbarn
Thu Jan 25, 2018 3:47 pm
Forum: Troubleshooting and Support
Topic: Web Interface & Alarms questions
Replies: 2
Views: 59

Re: Web Interface & Alarms questions

You are still limited to the built in Alarm. The HMI by BBRalley has a different Alarm that can be a URL.
by oakbarn
Wed Jan 24, 2018 5:49 pm
Forum: General Discussion
Topic: grounding noise
Replies: 2
Views: 90

Re: grounding noise

Search Grounding loops as well. You have to ground the AC to the DC of the BCS or your temps may fluctuate. Are your wires in a conduit? Are they a shielded twisted pair?
by oakbarn
Wed Jan 24, 2018 9:02 am
Forum: Troubleshooting and Support
Topic: Recipe Utility
Replies: 2
Views: 44

Re: Recipe Utility

I would only use Chrome as I have it not to work on other browsers Also Enter the IP Address on the Backup Screen and not the Recipe Screen, then go to the Recipe Tab. Enter the IP Address in one of these formats: (You do not need the :59845 if your Port is 80 (in Settings) Example 1: http://192.168...
by oakbarn
Tue Jan 23, 2018 5:56 pm
Forum: Roadmap and Feature Request
Topic: Exit Condition using Register?
Replies: 9
Views: 217

Re: Exit Condition using Register?

I can see how it would be useful for a Register to be an Exit condition. That way One Process State Exit (with the new State turning on the Register) cause a different process State to Exit simply because it exits the first Process State. I would like to see that also as I have had to “BURN” a State...
by oakbarn
Thu Jan 18, 2018 4:19 pm
Forum: BCS Programming
Topic: Running 2 states at once
Replies: 1
Views: 66

Re: Running 2 states at once

I have a Different Process for my Mash, Sparge, Boil and Hop Addition. I do something like you are asking. Are you Batch or Fly Sparging? I do a Batch Sparge, and have a Transfer Wort State in my Sparge Process where I take the First Run to my Brew Kettle. When I exit that, I auto start The Boil Pro...
by oakbarn
Wed Jan 17, 2018 1:32 pm
Forum: Troubleshooting and Support
Topic: SSR Not Closing
Replies: 10
Views: 239

Re: SSR Not Closing

Original Vininity 100-120 vac Input 6.0 vdc 1.0 Amp Digikey 100-240 vac input 5.9 vdc 1.2 Amps Digikeys are the one recommended by Curtis and the Original one came with my first BCS 462. It is only logical that something is odd with the BCS as other BCS has a one volt advantage. Also, one of the DIN...
by oakbarn
Wed Jan 17, 2018 7:40 am
Forum: Troubleshooting and Support
Topic: SSR Not Closing
Replies: 10
Views: 239

Re: SSR Not Closing

I got two new Power Supplies from digikey. I have 3 BCS 462s now as I just recently purchased one from a guy in Sweden that did not have the power supply. One is in my fermentation Cold Room and it is working fine. When I test the 5 + vdc : Swedish New Unit: #1: Original "Bad" Power Supply: 4.58 #2:...