ECC Forum

I'm managing two coolrooms (fermentation and lagering) with one BCS.

It would be helful to have an email alarm if a temperature rises over setpoint (because of compressor fault, energy blackouts or whatever).

Was already mentioned but want to support the idea.

Today I connected the power supply (5V and 12V) to run the BCS as well but the issue is the same.

I'm waiting to get the other displays in to try the other BCS with 3.7.0 FW.

BTW, I have another BCS 460 with 3.7.0 here and will try it tomorrow to see what the display does with that one.

Also 4 other new displays are coming in those days to test drive them.

Thanks Jon The FW of the display is 6.6.2 Sam, I have a separate power supply running. This power supply has 5V and 12V in one but I connected only the 12V part to the display and the neg on the BCS and Display as the manual says. Should I try to power the BCS with the same supply as it has 5V as we...

How do I figure out the FW version of the display, Jon?

Thanks, Joe

I just want to report the same issue here

BCS 462 - V 3.6.0

Display is used for mashtun temp

If you need any help in test driving a change in the OS count on me

Joe

Thanks Derrin

I'll visit the web frequently.

Joe

I'm using BCS 460's just got a new hardware configuration and need more outputs.

I tried to buy an extention board which was available from Alex but I can't see them anymore in BH.

Are they out of stock or not available anymore in the future?

Joe

I am trying to start a process with a momentary botton, I want to have this button doing the same as we have in the process menue, touch it once the process starts, touch it again the process should be stopped. I'm wondering if someone has done this and maybe I could save some hours with a good hint...

You could have done better informing your customers what is going on.

Everybody would have understand as things sometimes are running out of hands.

Anyhow placed an order.