ECC Forum

Hi,
Are the BCS still be manufcatured? I notice a couple of sites that support them are no longer running like the Temperature probe calibration site.

Hi, Trying to manually do an offset, there used to be a utility where you could put in an offset of say 2C but I cant seem to find it. Alot of the links are all dead now. Could somebody please help me in the right direction please. I have opened the utility app on the settings page of the BCS but th...

Has anybody used the data log to graph there temps after a brew (outside of the BCS), and if so what is the best software for automating the proccess of graphing it.

Problem solved.
Did a calibration on the probes and all working fine again.
Thanks

Hi, I am running the latest Firmware.
Any ideas what could start causing this?
Thanks

I have a BCS 460, with 3 temp probes connected. The refresh rate on screen tells me I'm getting around 1.5sec refresh, yet the temperature dials on the screen only seem to refresh approx every 10-15 seconds. When I click an output the response is pretty much instant, yet temps are delayed. System is...

Problem Solved, The BCS and Solenoids were on seperate power supplies and by making sure that the BCS was connected to the same power supply as the 5v Solenoids the problem resolved itself.

Thanks

Hi, I have my controller connected to 2 x 4 ch Relays and 1 x 1channel Relay. They are powered by 12volts. When all connected to the BCS I can control all outputs except OUT0, and if I turn all outputs on one after the other they will all turn on until you turn the last out put on which causes all t...

OK so I have removed the expansion card and hard reset the controller, and now we are back to normal. So I am going to leave the Expansion card off (mainly cause it cant be controlled in manual mode) and see how we go. Maybe in the next firmware update, there could be a way of manually controlling t...

No, I have not reloaded the firmware its still as it was out of the box. which is the latest version.
It was working fine, its just started doing it.