Thanks for all your help guys. So there is no way to protect my HLT element when running in "Manual" mode unless I wire the float switch inline with the element SSR? Here is a link to some more pics of my system http://forum.embeddedcc.com/viewtopic.php?f=16&t=2569.
Cheers,
Nathan
Search found 5 matches
- Sun Dec 07, 2014 4:22 am
- Forum: Troubleshooting and Support
- Topic: Float Switch Issue
- Replies: 13
- Views: 9534
- Sun Dec 07, 2014 4:18 am
- Forum: BCS in Action
- Topic: Ashnan²
- Replies: 1
- Views: 23828
Ashnan²
G'day from Australia, Well I have finally got to the stage where I am willing to show what I have been building for the past 18 months.It's a all electric HERMs twin stream system named Ashnan². I have built it all in stainless including the frame which is bead blasted. The two BK's and HLT are 150L...
- Thu Dec 04, 2014 7:06 pm
- Forum: Troubleshooting and Support
- Topic: Float Switch Issue
- Replies: 13
- Views: 9534
Re: Float Switch Issue
"Out0" is the HLT Element I don't have any process for it yet. I can't even get it to work in "Manual" mode. I have found that if I don't have "Out0-4" in PID control (all in on or off) the "Out0" will come on even though it should be controlled by the "D...
- Thu Dec 04, 2014 4:29 pm
- Forum: Troubleshooting and Support
- Topic: Float Switch Issue
- Replies: 13
- Views: 9534
Re: Float Switch Issue
Hey, the float switch is wired for NO and I don't have "One Shot" enabled. Here is a image of the ladder.
Thanks
Nathan
Thanks
Nathan
- Wed Dec 03, 2014 5:51 pm
- Forum: Troubleshooting and Support
- Topic: Float Switch Issue
- Replies: 13
- Views: 9534
Float Switch Issue
Hey, I have a float switch in my HLT that I want to control the heating element using ladder logic. I've tested and re tested everything so I know it's wired correctly, but when the float switch is activated it switches on the element for only a second or two then it shuts back off. Has anyone else ...