Search found 11 matches

by starsman20
Tue Jul 18, 2017 6:44 am
Forum: Troubleshooting and Support
Topic: voltage regulator cutoff voltage
Replies: 2
Views: 2203

Re: voltage regulator cutoff voltage

My supply is 5 VDC 5 amps which is way more than the BCS will need. I plugged it into the wall last night and measured 5.8 V output with the trim pot turned all the way up. This is going to work fine and will be much more robust.
by starsman20
Sun Jul 16, 2017 5:32 am
Forum: Troubleshooting and Support
Topic: voltage regulator cutoff voltage
Replies: 2
Views: 2203

voltage regulator cutoff voltage

Does anyone know the cutoff voltage for the voltage regulator in the 462? My wall wort let out the magic smoke and I am going to replace it with a medical grade power supply. I have access to a 5V supply that will go to about 5.5VDC when the pot is turned all the way up. The output of the 6V one tha...
by starsman20
Sat Oct 24, 2015 11:27 am
Forum: Troubleshooting and Support
Topic: one shot din light doesn't come on
Replies: 2
Views: 2485

Re: one shot din light doesn't come on

thanks. if i hold for 2 seconds it changes. mostly needed for wiring verification.
by starsman20
Sat Oct 24, 2015 9:45 am
Forum: Troubleshooting and Support
Topic: one shot din light doesn't come on
Replies: 2
Views: 2485

one shot din light doesn't come on

Is it supposed to flash green for a second on the interface when a one shot input is triggered?
by starsman20
Mon Oct 05, 2015 3:23 pm
Forum: Troubleshooting and Support
Topic: 4.0 recipes
Replies: 5
Views: 4104

Re: 4.0 recipes

That is the same version I am using

Version 45.0.2454.101 m

My firefox version is 41.0.1
by starsman20
Sun Oct 04, 2015 7:39 pm
Forum: Troubleshooting and Support
Topic: 4.0 recipes
Replies: 5
Views: 4104

Re: 4.0 recipes

After further testing it seems to work with firefox but not chrome......
by starsman20
Sun Oct 04, 2015 9:54 am
Forum: Troubleshooting and Support
Topic: 4.0 recipes
Replies: 5
Views: 4104

4.0 recipes

First of all Bravo on the new interface. Once I switched over to chrome and found the new bcsfinder the base system works great. easy setup and easy to see the states that are running. So I tried the setting 1 variable in the recipe variable page. Mash TEMP I set I think 3 drop downs for the process...
by starsman20
Thu Sep 24, 2015 7:16 am
Forum: Troubleshooting and Support
Topic: 4.0 upgrade problem
Replies: 8
Views: 5276

Re: 4.0 upgrade problem

Good news. Got home late and turned everything on but I did not have another browser on that PC and its not connected to the internet so I gave up. On my way back into the house I saw my ipad sitting on the table and decided to give it a try. Connected it to the same network as the bcs, put the ip a...
by starsman20
Wed Sep 23, 2015 1:09 pm
Forum: Troubleshooting and Support
Topic: 4.0 upgrade problem
Replies: 8
Views: 5276

Re: 4.0 upgrade problem

I have chrome and will try it tonight. Initially I was using firefox but it had problems with the update rate. If that is it then great but the finder utility was not seeing it. I am wondering if I waited long enough when it was powered down. Will post tomorrow if the browser fixes it. Thanks.
by starsman20
Wed Sep 23, 2015 12:58 pm
Forum: Troubleshooting and Support
Topic: 4.0 upgrade problem
Replies: 8
Views: 5276

Re: 4.0 upgrade problem

Network is DHCP with a linksys router and only 2 devices on it, a PC and the BCS. standard 192.168.1. addresses (3 and 4) previous version was 3.7.1 I downloaded and used tftp 32. When I selected the firmware upgrade on the settings screen the tftp server popped to the front and downloaded 100%. It ...