Search found 9 matches
- Thu Jan 16, 2020 5:00 am
- Forum: General Discussion
- Topic: CONTACT!
- Replies: 4
- Views: 15927
Re: CONTACT!
Is there no help to be had understanding how to program the BCS at all?
- Tue Dec 10, 2019 3:29 am
- Forum: General Discussion
- Topic: CONTACT!
- Replies: 4
- Views: 15927
Re: CONTACT!
Hmm. OK so I need a bit of help designing my brewday, or education for the Recipe Builder utility. I can kick down a couple bucks, if anyone is interested...
- Mon Dec 09, 2019 12:19 pm
- Forum: General Discussion
- Topic: CONTACT!
- Replies: 4
- Views: 15927
CONTACT!
Hey, I've sent a number of messages that are all stuck in the OUT box; whats up with that?
- Sat Feb 02, 2019 5:25 am
- Forum: Troubleshooting and Support
- Topic: Boil outlets not triggering on BCS-462
- Replies: 1
- Views: 9301
Re: Boil outlets not triggering on BCS-462
Good grief.... OK, so it's wired as a single output control triggering all 4 outlets, and a switch to disable any single one. So I have HEAT, BOIL, PUMP 1 and PUMP 2 Overly simplified :) Problem solved. Now I just gotta get everything installed and tested to get the PID tuned and figure out if I can...
- Sat Feb 02, 2019 4:39 am
- Forum: Troubleshooting and Support
- Topic: Boil outlets not triggering on BCS-462
- Replies: 1
- Views: 9301
Boil outlets not triggering on BCS-462
OK, so I setup the outputs as 4-herms (0-3) and 4-boil (4-7) From the Main page if I select any of the HERMs buttons, they fire. But not so for the Boil outputs. These are tied to the BCS on OUT0 and OUT1. There is about 3.8vdc on OUT0 when the Herms fires but nada for the Boil. Bad unit? If I move ...
- Thu Aug 02, 2018 3:02 pm
- Forum: BCS Programming
- Topic: Help with RIMS mash process
- Replies: 6
- Views: 14218
Re: Help with RIMS mash process
Lemme throw this in the mix.... We've been using a HERMs system for several years with highly repeatable results. The thing we got hung up on in the early days was always MASH temp. The important thing to remember is, the HOTTEST point in your system is the conversion point. With the temp probe on t...
- Mon Jul 09, 2018 7:45 am
- Forum: Troubleshooting and Support
- Topic: Can't find the BCS
- Replies: 3
- Views: 3425
Re: Can't find the BCS
Right. OK so that works well, I got in and of course I had defaulted it so we'll have to rebuild or load a config. I tried upgrading the firmware (4.0.1 to 4.1.2) and I'm running TFTP Desktop. pointed its directory to where the .BIN is located, disabled Windows Firewall and put my laptops address in...
- Sun Jul 08, 2018 2:05 pm
- Forum: Troubleshooting and Support
- Topic: Can't find the BCS
- Replies: 3
- Views: 3425
Re: Can't find the BCS
Great Scott; I read DHCP a dozen times. Don't know why I was looking for the machine address, it was something in the book. Sheesh! OK, I'll let you know...THANKS
- Sun Jul 08, 2018 1:20 pm
- Forum: Troubleshooting and Support
- Topic: Can't find the BCS
- Replies: 3
- Views: 3425
Can't find the BCS
OK, so I read several of the posts, and went Native. I hit the reset button like 4 times for 15seconds, and plugged my laptop directly into the BCS, disabled my Wireless NIC and set an IP of 169.254.0.64
I can't ping the expected .63 address of the BCS.
Thoughts?
I can't ping the expected .63 address of the BCS.
Thoughts?