ECC Forum

I was going to say make sure beta 2 doesn't get saved as bcs460(1).bin. My next guess is that tftp is not using the directory you intend. It loaded fine on my bcs 460.

Thanks, I'll check. Having 5v, 12v, 24v, and 120v AC that convenient is alluring.

Do you know if you run a 24v coil in a relay or contactor off of one of these? An engineer suggested you can by using the +12v as the positive and the -12v as the ground. I have not tested.

How does one set the HH:mm:ss in the X axis of the data log?

There are a couple of tricks one can use. If you contact the SMTP server that delivers the email for the address being sent to then authentication and SSL are not required by SMTP specification. This would be useful if one is sending the alert email to an email address provided by their own ISP. I w...

I have been wondering about using a computers switching power supply. I saved a few external disk drive cases with power supplies that are much smaller then a full sized one for a power hungry computer. I have not checked to see if the wall wort supplies AC or DC etc. On the upshot it would supply 1...

Maybe Brent could flash a version that doesn't change network settings.

I would like the ability to programmatically control which temperature is displayed. Having only one display it would be useful to have states or processes change temp probe and display associations. It could be handy to have the display cycle between them. Also the ability to display two temp probe...

Most routers allow one to configure a fixed IP number associated with a specific MAC address. Doing this with for the BCS can keep your BCS on the same IP number all the time and still using the easy, reliable DHCP configuration.