Search found 69 matches

by jward
Tue Nov 14, 2017 9:32 pm
Forum: Roadmap and Feature Request
Topic: lineDashType
Replies: 4
Views: 29841

Re: lineDashType

Have you used this datalogger by Mike Russel? https://forum.embeddedcc.com/viewtopic.php?f=13&t=2706&p=11382&hilit=Data+Logger#p11382 Creates a csv so you could do your own graph (after the fact and not live), but you can watch the temps as decimals I have an eye on this utility to use ...
by jward
Tue Nov 14, 2017 9:27 pm
Forum: Roadmap and Feature Request
Topic: lineDashType
Replies: 4
Views: 29841

Re: lineDashType

SamIam wrote:
Tue Nov 14, 2017 10:41 am
Just take a picture of the graph. 😊
Maybe it will work on my phone.
by jward
Tue Nov 14, 2017 7:41 am
Forum: Roadmap and Feature Request
Topic: lineDashType
Replies: 4
Views: 29841

lineDashType

As someone with color sighted deficiency I would like to be able to select the html lineDashType in addition to the color in the data log graph.
by jward
Sun Nov 12, 2017 10:11 am
Forum: BCS in Action
Topic: BSC Fermentation Controller
Replies: 3
Views: 15016

Re: BSC Fermentation Controller

I worked through some grounding issues with the help of JonW (thank you!) adding a connector block for grounding wires: https://scontent-lga3-1.xx.fbcdn.net/v/t1.0-9/23559554_1863862856960648_2707845128401563043_n.jpg?oh=00615d1273a647e4547b07c7be883ea1&oe=5AA0CE8E Here is a photo of the system ...
by jward
Thu Nov 09, 2017 5:07 pm
Forum: BCS in Action
Topic: BSC Fermentation Controller
Replies: 3
Views: 15016

Re: BSC Fermentation Controller

That is the Electronics Salon relay, but I think the other one was Electronics Salon too but the DIN version. I was going to go with DIN but decided better of it. It's a different PS. I was going to use the one from a disk drive enclosure but came by this smaller one that only does 12v.
by jward
Sun Nov 05, 2017 12:04 pm
Forum: BCS in Action
Topic: BSC Fermentation Controller
Replies: 3
Views: 15016

BSC Fermentation Controller

Made good progress this weekend building out BCS based fermentation controller. https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/23132060_1856762494337351_984162309475437918_n.jpg?oh=63c157e16f70782fff115ee8fe7104e9&oe=5AAF458F https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/23167887_1856762491004018...
by jward
Sun Jul 16, 2017 10:15 am
Forum: Troubleshooting and Support
Topic: voltage regulator cutoff voltage
Replies: 2
Views: 2192

Re: voltage regulator cutoff voltage

I can't answer your question about the builtin regulator. I can say that I ran my BCS 460 without issue on 5V wall wort but I never measured it's actual output. It was suggested that using a 5V wall wort could under power the BCS when it's running a lot of outputs which I wasn't. You can go with a h...
by jward
Thu May 25, 2017 8:41 pm
Forum: Wiring, Electrical, Relays and Sensors
Topic: Getting rid of the Wall Wort Power Supply
Replies: 10
Views: 20977

Re: Getting rid of the Wall Wort Power Supply

I have run a BCS with a 5V wall wort. It worked fine but it was only powering leds on a couple outputs and 2 temp sensors as I was bench testing the configuration. You might find the 6V more reliable if you have a lot going on.
by jward
Wed Apr 26, 2017 9:30 pm
Forum: Troubleshooting and Support
Topic: Can't connect to BCS updating 4.0.0 to 4.0.1
Replies: 9
Views: 12090

Re: Can't connect to BCS updating 4.0.0 to 4.0.1

I would check the router logs to see what address it picked up. Yes, it should have been given the reservation you set but I would check the dhcp log.
by jward
Thu Mar 02, 2017 7:40 am
Forum: Troubleshooting and Support
Topic: Connecting BCS-460 though a repeating router
Replies: 6
Views: 3647

Re: Connecting BCS-460 though a repeating router

Connect to your router and see what address its DHCP server gave it.