Yes...the temp displayed in the lower right hand corner is not updating except if I refresh the entire screen. This is only a display issue as the info on the data log page is accurate.
picky, but I think it should dynamically update.
Search found 39 matches
- Mon Mar 26, 2012 1:53 pm
- Forum: Troubleshooting and Support
- Topic: Ramp Temp not updating on Main Control Page
- Replies: 4
- Views: 6192
- Mon Mar 19, 2012 1:20 pm
- Forum: Troubleshooting and Support
- Topic: Ramp Temp not updating on Main Control Page
- Replies: 4
- Views: 6192
Ramp Temp not updating on Main Control Page
Using the Ramp function in a fermentation chamber and v3.4.5 will not dynamically display the ramp set temp on the main control page without refreshing the page. Is this the way its supposed to be?
- Sun Mar 18, 2012 7:49 pm
- Forum: Troubleshooting and Support
- Topic: Displaying negative temps on Data Log page
- Replies: 3
- Views: 3184
Re: Displaying negative temps on Data Log page
Thanks ECC.
- Sat Feb 25, 2012 1:17 pm
- Forum: Troubleshooting and Support
- Topic: Displaying negative temps on Data Log page
- Replies: 3
- Views: 3184
Displaying negative temps on Data Log page
On the Data Log page I'm trying to use -5 to 105 for left Max/Min Y and log the output controlling the fermenter compressor to log the on/off cycles of the compressor, as it displays as either 0 (off) or 100 (on). If I use 0/100, I cant see the horizontal line. When I hit apply, the -5 changes to 25...
- Sat Feb 25, 2012 1:08 pm
- Forum: Roadmap and Feature Request
- Topic: Better Probe Calibration technique
- Replies: 12
- Views: 16427
Re: Better Probe Calibration technique
Actually, I do calibrate every one as they are close but not dead on. I built an apparatus with 5 Tee's with a place to put the lab thermometer and up to 4 probes then pump water through at 104 and 158. ( I do use an ECC probe as my standard as it is very close to my lab thermometer). I use a ice ba...
- Fri Feb 24, 2012 8:14 am
- Forum: Roadmap and Feature Request
- Topic: Variables....
- Replies: 2
- Views: 5136
Re: Variables....
what about possible and time frame?
- Thu Feb 23, 2012 6:54 pm
- Forum: Roadmap and Feature Request
- Topic: Better Probe Calibration technique
- Replies: 12
- Views: 16427
Better Probe Calibration technique
After owning and brewing with the BCS-462 for several months, the one thing that drives me crazy is the probe calibration/recalibration procedure for a new install or replacement probe. Its an exercise in futility. What I would like is a way to set the temperatures that i read on screen to a known t...
- Sun Jan 08, 2012 12:50 pm
- Forum: HMI Builder
- Topic: HMI Image
- Replies: 10
- Views: 29499
Re: HMI Image
thx!!!
- Sat Dec 31, 2011 1:58 pm
- Forum: HMI Builder
- Topic: HMI Image
- Replies: 10
- Views: 29499
Re: HMI Image
What program did you use to draw those images?