ECC Forum

I am still reading and trying to understand ladder logic programming. Here is my problem. I have a system that runs on 4,600 watts resistor. We are going to use perhaps some propane to reduce the on time and the power consumption. But when we designed the vessels they came with 5 resistor of 5,500 w...

I hade a brutus once. I control 1 output with one temp probe. mine has the assco valve. very easy using the hysteriris. the swing of 4 is nice depending on how fast you disipaqte the heat on the vessel you can play with it. having too close in my case force the valve to be on=off shorter times in pe...

thanks. Is like I am planning in my programing. now I have to fiugre how to creat an "IF" programing. I have a limitation on 6 out maximum, due to power (AC) consumption. so when ai run 4 on the mash tun I have 4 more in the HLT. now 2 has temp probe reference to. so this I can control buy...

so when you program the wait for input and it flash you after the adition hit the next state? I am using this concept but in the nashing grain addition programing

ok I activate several out direct on the stage I want to jump. And I saw them go on, but the stage per se dont go green on my screen so I dont know at what stage I am on? unless I see the outs and use my programing logic


ChuckP

I am playing with the programing of the new firmware. I want to jump from 1 proces to another one. but my logic dont work. example I took proces 0 call it Mash, I proragm a timer 0 to cunt for 2 minutes and jump to state 7. then on state 7 I click on Stopp proces 0 and start on proces 7. The alar go...

I have to admit I still need to read more and understand the ladder logic and the rest of the programing. My problem is similar. Due to the max power I can pull from my main AC is around 150 amps. I am planning to run 4 resistors on each of my 145 gal tank, also use some propane to help speed up the...

ok after I updated it hapen twice I lost conection, but I mange to get it backk even with dchp on and off. Now when you change the manes on the outputs and temp probes. should this stay with the unit? I have los them twice

I upgarde but lost the basic hmi for the tanks. Even they dont work for me becasue I have 2 fermenters. But in the settings I enter in the advance JS a kink to http://www.embeddedcc.com/wiki/images/5/58/Gbrewing.png but dont work. I went back to the opriginal adress to the embedded jc but dont see a...