ECC Forum

I finally brewed my first batch with the BCS!!! My design was inspired by JonW single tier 3 pump system: http://www.embeddedcontrolconcepts.com/forum/viewtopic.php?f=16&t=342 My goal was to have an almost completely automated system, where I didn’t have to switch hoses, I could set temperature ...

I haven't tried this but you could set an exit condition of the state "mash maintain 150" to "heater output > 155" then go to a "rest" state that turns off the heat, then that state has an exit condition "heater output < 155" to go back to the "mash maint...

A couple of ways to do that. You should be able to set your DHCP on your router for a range of IP's (192.168.0.1 to 192.168.0.99) then you can use number greater than 99 for static IP's. Another way I found on my new netgear router is you can permanently assign a DHCP address to a particular device,...

I would buy the app for my iPad if it supported the BCS-462...

I am having trouble with my BCS-462. I can't get it on the network reliably. It was working just fine, then when I hadn't connected it in a week or so, I tried today it's not connecting. At first I was able to connect with a browser, but after a couple minutes, it would lose connection. Now I can't ...

Is there a benefit other than simplified wiring by having a common ground between the 5v, 12v, and 120v systems?

I didn't even know that it was possible to do this. Need to study up on wiring somr more.

When I log data, then click Generate File to create the file, it shows a link like this "bcsLog2011031210:27:58.csv", but when I click on it to download, it comes to my computer (using Chrome Browser) as "Download" with no extension. It would be nice to have the same file name as...