Search found 679 matches
- Thu Jan 05, 2012 8:06 am
- Forum: HMI Builder
- Topic: HMI Builder
- Replies: 6
- Views: 17052
Re: HMI Builder
This turns out to be an issue with IE9. I will fix the issue in a firmware release, but in the meantime please use Chrome, Firefox, or Safari. IE is technically not supported, although IE9 does work better than the previous versions (which don't work at all). I'll try to get this update in the next ...
- Thu Jan 05, 2012 7:23 am
- Forum: Troubleshooting and Support
- Topic: OSC PID debug light is blinking
- Replies: 9
- Views: 8671
Re: OSC PID debug light is blinking
The problem turned out to be incorrect markings on the pid display card itself. All of the documentation was 100% correct (which is what is reported in the thread above). However I think he followed the silkscreen on the card which is NOT correct. I've send an email to oscsys about this, and will ma...
- Wed Dec 21, 2011 9:19 pm
- Forum: Troubleshooting and Support
- Topic: Incorrect hysteresis?
- Replies: 5
- Views: 5528
Re: Incorrect hysteresis?
I programmed this based on your description, but it seems to be working as expected. If you email me your process file I can look at your programming in more detail.
- Wed Dec 21, 2011 9:30 am
- Forum: HMI Builder
- Topic: HMI Builder
- Replies: 6
- Views: 17052
Re: HMI Builder
What browser are you using? You need to use a modern browser (Chrome, Firefox, Safari, IE9). Old IE8 won't work. clearwaterbrewers advice only applies to custom widgets (via external.js). All of the standard widgets display inactive I/O as gray. Are you using a custom external.js? Its possible that ...
- Wed Dec 21, 2011 7:41 am
- Forum: General Discussion
- Topic: New HMI Builder forum
- Replies: 0
- Views: 18604
New HMI Builder forum
Please update your notifications to include the new HMI Builder forum, created to make it easier to share your HMI's and ask questions.
- Wed Dec 21, 2011 7:21 am
- Forum: HMI Builder
- Topic: HMI Builder
- Replies: 6
- Views: 17052
Re: HMI Builder
Hi Denny. I just updated the wiki with a Getting Started section on the HMI Builder. http://www.embeddedcc.com/wiki/index.php?title=HMI_Builder I hope that makes it clearer. Does that answer your question? Are there other elements that might not be clear, that you feel should be included in the inst...
- Tue Dec 20, 2011 8:06 am
- Forum: Wiring, Electrical, Relays and Sensors
- Topic: Make and model of thermistor in probe
- Replies: 11
- Views: 9138
Re: Make and model of thermistor in probe
Those aren't compatible, they are type K thermocouples. The BCS uses 10k NTC thermistors:
http://www.embeddedcc.com/wiki/index.ph ... ure_Inputs
http://www.embeddedcc.com/wiki/index.ph ... ure_Inputs
- Sun Dec 18, 2011 7:14 pm
- Forum: Troubleshooting and Support
- Topic: OSC PID debug light is blinking
- Replies: 9
- Views: 8671
Re: OSC PID debug light is blinking
Yes, all grounds need to be connected together. Connect BCS GND, I2C Comm 5. GND, and 12v power supply -V
- Wed Dec 14, 2011 1:53 pm
- Forum: Troubleshooting and Support
- Topic: Incorrect hysteresis?
- Replies: 5
- Views: 5528
Re: Incorrect hysteresis?
Thanks for the detailed explanation. I'll try to reproduce this. If you could post the processs config file, that would help, but I can easily program this and see if i get the same strange behavior. It should definitely not be switching around 37 in state1 if you have the setpoint at 38.
- Mon Dec 12, 2011 1:29 pm
- Forum: Wiring, Electrical, Relays and Sensors
- Topic: BCS-460 only 1 volt?
- Replies: 15
- Views: 13094
Re: BCS-460 only 1 volt?
The laptop stand is a cool idea.
What are the 4 T's on the bottom of the control panel for?
What are the 4 T's on the bottom of the control panel for?