Page 3 of 3
Re: BCS 460 Build help
Posted: Tue Nov 17, 2015 3:27 pm
by JonW
The M12 connector uses the blue and the black wire for temp probes. The brown wire is not used.
Re: BCS 460 Build help
Posted: Tue Nov 17, 2015 6:45 pm
by wyowolf
ok, I am going to assume black is the ground?
Re: BCS 460 Build help
Posted: Tue Nov 17, 2015 6:47 pm
by oakbarn
Polarity does not matter but make them all the same so you do not get confused. Use Black as the Ground and Blue for the Temp.
Re: BCS 460 Build help
Posted: Wed Nov 18, 2015 3:28 am
by wyowolf
ok great.
Replaced the SSR last night and fired it up.... works perfectly!
now i just have to figure out how to run the BCS program for it...
Re: BCS 460 Build help
Posted: Wed Nov 18, 2015 3:46 am
by wyowolf
some pics
Re: BCS 460 Build help
Posted: Wed Nov 18, 2015 9:17 am
by oakbarn
Where did you get the power guage.
Re: BCS 460 Build help
Posted: Wed Nov 18, 2015 9:19 am
by wyowolf
http://www.amazon.com/gp/product/B00YY1 ... ge_o01_s00
Amazon... 16 bucks... so far it seems to work just fine.