Issues reconnecting to network after power cycling

Get help and insight.
Post Reply
odd13ryan
Posts: 6
Joined: Mon Nov 28, 2016 4:29 pm
Bot?: No

Issues reconnecting to network after power cycling

Post by odd13ryan »

Hi, my setup has 3 BCS-462s on a single network. Normally, they connect fine when they are powered on. Periodically we will see one of the three fail to connect when powered on. We generally need to power cycle the device several times to get it to connect again. Sometimes we end up hitting the reset button out of frustration (not a hard reset) but I don't know whether that does anything different than a power cycle. Is there a consistent way to get the BCS to connect?

Other random notes:
- They are configured to use static IP addresses outside of my router's DHCP range (to avoid IP conflicts).
- Each one runs on a separate port so we can use port forwarding to access them off-network.
brahn
Posts: 543
Joined: Thu Dec 13, 2012 11:01 am
Bot?: No

Re: Issues reconnecting to network after power cycling

Post by brahn »

I've not seen or heard of this issue happening with the BCS. Have you checked the network cables? Specifically how well they're seated in the the router and BCS?
Post Reply