Issues reconnecting to network after power cycling
Posted: Thu Jun 01, 2017 7:39 am
Hi, my setup has 3 BCS-462s on a single network. Normally, they connect fine when they are powered on. Periodically we will see one of the three fail to connect when powered on. We generally need to power cycle the device several times to get it to connect again. Sometimes we end up hitting the reset button out of frustration (not a hard reset) but I don't know whether that does anything different than a power cycle. Is there a consistent way to get the BCS to connect?
Other random notes:
- They are configured to use static IP addresses outside of my router's DHCP range (to avoid IP conflicts).
- Each one runs on a separate port so we can use port forwarding to access them off-network.
Other random notes:
- They are configured to use static IP addresses outside of my router's DHCP range (to avoid IP conflicts).
- Each one runs on a separate port so we can use port forwarding to access them off-network.