Temp probes go to zero

Get help and insight.
Post Reply
dryhopgulch
Posts: 7
Joined: Sun Oct 16, 2016 12:00 pm
Bot?: No

Temp probes go to zero

Post by dryhopgulch »

I'm having intermittent issues with my BCS462. Both temp probes will intermittently go to zero and require a reset of the controller. I've tried reconnecting probes but ultimately both of my past 2 brew days have required me to reset the controller and the probes then work fine. Think it's a short somewhere?
User avatar
oakbarn
Posts: 846
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Re: Temp probes go to zero

Post by oakbarn »

Probes go to Zero if you are disconnected so I would check your wiring. I would remove the wires from the BCS and use some fine sandpaper on those ends. If you have any solder connections,I would check them as well.
dryhopgulch
Posts: 7
Joined: Sun Oct 16, 2016 12:00 pm
Bot?: No

Re: Temp probes go to zero

Post by dryhopgulch »

thanks, I figured I'd have to tear the controller apart :D
Post Reply