Page 1 of 1

Temp probes go to zero

Posted: Sun Aug 27, 2017 12:48 pm
by dryhopgulch
I'm having intermittent issues with my BCS462. Both temp probes will intermittently go to zero and require a reset of the controller. I've tried reconnecting probes but ultimately both of my past 2 brew days have required me to reset the controller and the probes then work fine. Think it's a short somewhere?

Re: Temp probes go to zero

Posted: Sun Aug 27, 2017 1:24 pm
by oakbarn
Probes go to Zero if you are disconnected so I would check your wiring. I would remove the wires from the BCS and use some fine sandpaper on those ends. If you have any solder connections,I would check them as well.

Re: Temp probes go to zero

Posted: Sun Aug 27, 2017 1:39 pm
by dryhopgulch
thanks, I figured I'd have to tear the controller apart :D