Re: SSR Not Closing
Posted: Wed Jan 17, 2018 1:32 pm
Original Vininity
100-120 vac Input
6.0 vdc 1.0 Amp
Digikey
100-240 vac input
5.9 vdc 1.2 Amps
Digikeys are the one recommended by Curtis and the Original one came with my first BCS 462. It is only logical that something is odd with the BCS as other BCS has a one volt advantage. Also, one of the DINs is "ASSERTED" even with the Green Connectors removed on the problem BCS.
It has worked very well except the last Brew when that I noticed an Out was not turning on the SSR. I thought I had a bad SSR and replaced it. No help. I did a test with an SSR Tester setup I have and that Out would not trigger the SSR.
I also noticed some DINs stopped working (Momentary Push Button Switches) properly.
It happened for no apparent reason that I know of. Since I have the new spare, I am just going to replace it. I have also contacted Brewer's Hardware to see if they have an idea or can fix it.
100-120 vac Input
6.0 vdc 1.0 Amp
Digikey
100-240 vac input
5.9 vdc 1.2 Amps
Digikeys are the one recommended by Curtis and the Original one came with my first BCS 462. It is only logical that something is odd with the BCS as other BCS has a one volt advantage. Also, one of the DINs is "ASSERTED" even with the Green Connectors removed on the problem BCS.
It has worked very well except the last Brew when that I noticed an Out was not turning on the SSR. I thought I had a bad SSR and replaced it. No help. I did a test with an SSR Tester setup I have and that Out would not trigger the SSR.
I also noticed some DINs stopped working (Momentary Push Button Switches) properly.
It happened for no apparent reason that I know of. Since I have the new spare, I am just going to replace it. I have also contacted Brewer's Hardware to see if they have an idea or can fix it.