Low Output Voltage

Get help and insight.
Post Reply
Fourswitch
Posts: 2
Joined: Thu Feb 08, 2018 5:18 am
Bot?: No

Low Output Voltage

Post by Fourswitch » Thu Feb 08, 2018 5:21 am

Hey there,

so i purchased a BCS 462 recently, after completing my project and powering the thing up for the first time i find it is not closing any of the 5VDC relays it is wired to, i have tested it again and again, it has 6.2VDC input from the power supply and the best i get at the DO pins is 2.6VDC.

ive searched the forums and this seems to be the only problem like this i can find that does not come down to the power supply. I am hoping you may have a solution, or at worst case some sort of warranty or replacement system? please let me know,

Thanks

Matt

User avatar
oakbarn
Posts: 803
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Re: Low Output Voltage

Post by oakbarn » Thu Feb 08, 2018 6:33 am

If you are getting. 6.2 on the Pins of the Wall wart、I understand there is an on board 5 volt regulator that may be able to be changed by Brewe Hardware

Fourswitch
Posts: 2
Joined: Thu Feb 08, 2018 5:18 am
Bot?: No

Re: Low Output Voltage

Post by Fourswitch » Thu Feb 08, 2018 12:01 pm

Just called them, they’ll look into it and email me back:) worst case I may try and replace it myself:)

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests