Page 1 of 1

Temperature Sensor Issue

Posted: Mon Mar 12, 2018 7:34 pm
by rednender
I have a temperature sensor that is reading 55.8 degrees even when nothing is plugged into the BCS. This just started happening. Are there any troubleshooting techniques I should preform or is the BCS most likely shot?

Re: Temperature Sensor Issue

Posted: Mon Mar 12, 2018 7:35 pm
by JonW
Have you verified the coefficients on the settings page?

Re: Temperature Sensor Issue

Posted: Mon Mar 12, 2018 8:00 pm
by rednender
Just for reference. This is with nothing plugged in. Everything except an Ethernet cable has been removed from the BCS.

Image
Image

Re: Temperature Sensor Issue

Posted: Mon Mar 12, 2018 8:27 pm
by JonW
Backup your config, then reset to defaults and see if the problem still exists. If so, it's likely a hardware failure on the input.

Re: Temperature Sensor Issue

Posted: Mon Mar 12, 2018 8:31 pm
by rednender
Yeah, I already tried resetting to defaults. That's what I was afraid of. Here's another question, no one seems to be selling the 460s/462s anywhere. Is there anyway to get a replacement. If not, what's the news on the 480s/482s? I'm not completely SOL, but it is a bit annoying.