Temperature Sensor Issue
Temperature Sensor Issue
I have a temperature sensor that is reading 55.8 degrees even when nothing is plugged into the BCS. This just started happening. Are there any troubleshooting techniques I should preform or is the BCS most likely shot?
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Temperature Sensor Issue
Have you verified the coefficients on the settings page?
Re: Temperature Sensor Issue
Just for reference. This is with nothing plugged in. Everything except an Ethernet cable has been removed from the BCS.
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Temperature Sensor Issue
Backup your config, then reset to defaults and see if the problem still exists. If so, it's likely a hardware failure on the input.
Re: Temperature Sensor Issue
Yeah, I already tried resetting to defaults. That's what I was afraid of. Here's another question, no one seems to be selling the 460s/462s anywhere. Is there anyway to get a replacement. If not, what's the news on the 480s/482s? I'm not completely SOL, but it is a bit annoying.