help with fermentor setup

Get help and insight.
Post Reply
elmoa
Posts: 7
Joined: Mon Jan 23, 2017 2:01 pm
Bot?: No

help with fermentor setup

Post by elmoa »

Just got my bcs482 and i want to be able to control fermentation temps on 8 fermentors, each fermentor has a motorized ball valve.
for the first phase i just want to setup a fermatation temp for each fermentor, like if i was using a johnson 421 controler target temp with some tolerance, and have 1 output used for each ball valve. Is it possible to do without using the process part of the bcs as i have other plans for the process.
any help is appreciated
manuel
JonW
Site Admin
Posts: 1726
Joined: Sun Jul 18, 2010 7:51 am
Bot?: No
Location: Huntington Beach, CA
Contact:

Re: help with fermentor setup

Post by JonW »

You need to setup at least one process to do temperature control.
elmoa
Posts: 7
Joined: Mon Jan 23, 2017 2:01 pm
Bot?: No

Re: help with fermentor setup

Post by elmoa »

JonW wrote:
Thu Apr 19, 2018 12:48 am
You need to setup at least one process to do temperature control.
do you have an example on how its done
JonW
Site Admin
Posts: 1726
Joined: Sun Jul 18, 2010 7:51 am
Bot?: No
Location: Huntington Beach, CA
Contact:

Re: help with fermentor setup

Post by JonW »

Start with the help file to learn some basics, then look at the examples.
https://docs.embeddedcc.com/
Post Reply