482 Ladder Logic

Get help and insight.
Post Reply
User avatar
oakbarn
Posts: 846
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

482 Ladder Logic

Post by oakbarn »

The contacts do not seem to be able to be moved into position
LL1.png
LL1.png (22.54 KiB) Viewed 2186 times
I did clear my browser history
JonW
Site Admin
Posts: 1726
Joined: Sun Jul 18, 2010 7:51 am
Bot?: No
Location: Huntington Beach, CA
Contact:

Re: 482 Ladder Logic

Post by JonW »

Wires are used between elements for connecting them. You need to use a contact on the element box.
User avatar
oakbarn
Posts: 846
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Re: 482 Ladder Logic

Post by oakbarn »

Not an issue. I was confused as to what I had done. I could not load wires in the rungs. I got that weird gray box instead of the normal widget. I figured it somewhat out. If you put a NC Process or NC Output in the Coil Slot (last one), that Process or Output is ASSERTED. You can no longer place wires in ANY rung. If you try to place a wire, you get the odd grey box. It did this with the BCS 462 as well. You should not put those in a Coil Slot.
LL2.png
LL2.png (17.64 KiB) Viewed 2178 times
Post Reply