Outputs(configurable) Disabled
Posted: Fri Jun 15, 2018 12:57 pm
Hi! I'm revisiting using my BCS462 again. I've got it connected and trying to build a process. I have have my outputs 0-6 enabled for 4 valves and 2 pumps, then my RIMS tube. All outputs work manually from the Main Control window.
In my Settings:
I have the first three Temp Probes enabled (tested working well)
My Outputs 0-6 are enabled and renamed appropriately
In my Process Editor, Process 1, State 1:
Very basic:
No timers
No Ramp Mode
All Output Control (Configurable) outputs are listed...
The Output Control (Configurable) Outputs are ALL "disabled" - I can select the Mode on each one, but all the other drop-downs are Disabled with the red crossed-out-circle on mouse-over and each are grayed-out. My Google search and searching this forum didn't help much...
What am I missing?
Thanks!
In my Settings:
I have the first three Temp Probes enabled (tested working well)
My Outputs 0-6 are enabled and renamed appropriately
In my Process Editor, Process 1, State 1:
Very basic:
No timers
No Ramp Mode
All Output Control (Configurable) outputs are listed...
The Output Control (Configurable) Outputs are ALL "disabled" - I can select the Mode on each one, but all the other drop-downs are Disabled with the red crossed-out-circle on mouse-over and each are grayed-out. My Google search and searching this forum didn't help much...
What am I missing?
Thanks!