BSC 462 Firmware will not update
-
- Posts: 8
- Joined: Wed Jul 25, 2018 5:12 pm
- Bot?: No
BSC 462 Firmware will not update
I have tried multiple attempts with multile browsers. I have looked at other similar disscusions and I have had no success. My BCS 462 will not update it's firmware past 4.0.1. From what I am gathering from the other forums, this is the reason the utility will not recognize my BCS IP address, which is my main reason for this post. I can not back-up or restore anything.
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: BSC 462 Firmware will not update
Here's a few questions to get us started:
What TFTP program are you using?
Is the file you are trying to upload correctly named bcs460.bin?
Where is the file located in reference to the TFTP file folder?
What is the IP numbering of the BCS vs the station running TFTP?
Have you checked if your computer firewall is blocking the TFTP port?
What TFTP program are you using?
Is the file you are trying to upload correctly named bcs460.bin?
Where is the file located in reference to the TFTP file folder?
What is the IP numbering of the BCS vs the station running TFTP?
Have you checked if your computer firewall is blocking the TFTP port?
-
- Posts: 8
- Joined: Wed Jul 25, 2018 5:12 pm
- Bot?: No
Re: BSC 462 Firmware will not update
I was able to final get the Firware updated to 4.1.2, however the BCS Utility still will not recognize my BCS IP Address when I enter it.
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: BSC 462 Firmware will not update
Are you inlcuding the http:// in front of the IP address? It needs to be in that format - e.g. http://192.168.1.100
-
- Posts: 8
- Joined: Wed Jul 25, 2018 5:12 pm
- Bot?: No
Re: BSC 462 Firmware will not update
Yes, I am including it.
-
- Posts: 8
- Joined: Wed Jul 25, 2018 5:12 pm
- Bot?: No
Re: BSC 462 Firmware will not update
Just to confirm, this is my firmware: 4.1.2 build edf0fe2c
Re: BSC 462 Firmware will not update
if your Ip is
http://192.168.1.218
try http://192.168.1.218/
The Trailing "/" has been an issue for me for some odd reason. Try with and without. You can also enter the IP in The Recipe, Migrator or PID Tuner (Top of the Utilities). I have had this issue but have always been able to finally get it to work. Chrome is best.
http://192.168.1.218
try http://192.168.1.218/
The Trailing "/" has been an issue for me for some odd reason. Try with and without. You can also enter the IP in The Recipe, Migrator or PID Tuner (Top of the Utilities). I have had this issue but have always been able to finally get it to work. Chrome is best.
-
- Posts: 8
- Joined: Wed Jul 25, 2018 5:12 pm
- Bot?: No
Re: BSC 462 Firmware will not update
Still no luck, tried with and without the / and on chrome.
Re: BSC 462 Firmware will not update
Have you cleared your browser history? Also try to log in to one of the other tabs (restore/ recipe)
-
- Posts: 8
- Joined: Wed Jul 25, 2018 5:12 pm
- Bot?: No
Re: BSC 462 Firmware will not update
I cleared the history on both browsers with still no luck. It will not work with the other tabs either.
I enter the IP address, and it just shows a red check mark in the right side of the line.
I enter the IP address, and it just shows a red check mark in the right side of the line.