Wrong temp reading BCS 460

Get help and insight.
Post Reply
gpb49
Posts: 5
Joined: Wed Dec 19, 2018 3:36 pm
Bot?: No

Wrong temp reading BCS 460

Post by gpb49 »

Temp prob wrong reading this week It gives a reading that is 6 digits long and after 10 sec it flashes the correct temp then back to the long digits. I interchanged the prop and it does the same thing so I would think it is in the BCS or the software. How can I get it to read the HTL correctly ?
Thanks for your time
gpb49
JonW
Site Admin
Posts: 1726
Joined: Sun Jul 18, 2010 7:51 am
Bot?: No
Location: Huntington Beach, CA
Contact:

Re: Wrong temp reading BCS 460

Post by JonW »

Have you power cycled it? You can also try clearing your config and reloading from a backup.

I'd also suggest going to the latest firmware.
https://forum.embeddedcc.com/viewtopic.php?f=11&t=3078
gpb49
Posts: 5
Joined: Wed Dec 19, 2018 3:36 pm
Bot?: No

Re: Wrong temp reading BCS 460

Post by gpb49 »

what version firmware will I be looking for my BCS 460 and where my I downloaded it from?
thank you
JonW
Site Admin
Posts: 1726
Joined: Sun Jul 18, 2010 7:51 am
Bot?: No
Location: Huntington Beach, CA
Contact:

Re: Wrong temp reading BCS 460

Post by JonW »

I put the download link in the message above.
Post Reply