Temp prob wrong reading this week It gives a reading that is 6 digits long and after 10 sec it flashes the correct temp then back to the long digits. I interchanged the prop and it does the same thing so I would think it is in the BCS or the software. How can I get it to read the HTL correctly ?
Thanks for your time
gpb49
Wrong temp reading BCS 460
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Wrong temp reading BCS 460
Have you power cycled it? You can also try clearing your config and reloading from a backup.
I'd also suggest going to the latest firmware.
https://forum.embeddedcc.com/viewtopic.php?f=11&t=3078
I'd also suggest going to the latest firmware.
https://forum.embeddedcc.com/viewtopic.php?f=11&t=3078
Re: Wrong temp reading BCS 460
what version firmware will I be looking for my BCS 460 and where my I downloaded it from?
thank you
thank you
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Wrong temp reading BCS 460
I put the download link in the message above.