I'm starting a new thread on this as it was tacked onto another one of my issues. I recently updated to latest 4.x version from 3.7.1. Using the 3x migrator utility , I was able to fully transfer (methinnks) all of my .config processes, but when I try to migrate my system setting .config, it seems like it does not complete. It seems to pause at output 6. Is this all of the settings it needs to migrate? screenshot below. Any help would be appreciated.
Incomplete migration of ver 3.x system settings
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Incomplete migration of ver 3.x system settings
I'll need to have Brent look at the code. It's quite possible something broke in one of the latest firmware releases due to new API features. This utility doesn't see much use or discussion since it was used by most a few years back making the jump to 4.x.
Honestly, if it's just your system config, it'll only take about 5 minutes to input the names and options.
Honestly, if it's just your system config, it'll only take about 5 minutes to input the names and options.
Re: Incomplete migration of ver 3.x system settings
I am unclear on what is contained in the system settings. Are temperature probe calibrations contained in here? I would say it would be easy to input manually, but I have no way to see what I had as my system settings in ver 3 or know what is encompassed in system settings. Any suggestion would be greatly appreciated.
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Incomplete migration of ver 3.x system settings
It's pretty much what's on your "Settings" page. If you've custom calibrated your temp probes, you can open your backup file in a text editor and see the values stored there.
Re: Incomplete migration of ver 3.x system settings
When I open in Notepad, I get this, Is there a better way to organize this data in a text editor? Thanks
- Attachments
-
- notepad.png (216.54 KiB) Viewed 9627 times
Re: Incomplete migration of ver 3.x system settings
It is a flat file meaning it has no line breaks. You might be able to create an excel macro to parse it.
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Incomplete migration of ver 3.x system settings
Click "Format" then "Word Wrap" to see the data.
If you can't figure it out, you can send your backup file to me and I'll pull the relevant data from it. I can also see if I can do a clean conversion, but short on time right now, so we'll see.
tech@embeddedcc.com
If you can't figure it out, you can send your backup file to me and I'll pull the relevant data from it. I can also see if I can do a clean conversion, but short on time right now, so we'll see.
tech@embeddedcc.com