It looks like the current temp column on the Temperature Setpoint Adjust screen is messed up.
It shows a current temp of 0 for all my refrigerators. It appears that everything is running fine, just displaying wrong.
The first 4 temp probes in my screenshot are displaying 0 because they are unplugged when I'm not brewing. I'm not sure at this point if the Temp Setpoint Adjust screen is displaying the temp for the wrong sensors or if it is just displaying 0. I'll have to plug my rig back in to verify.
Temp Setpoint Adjust Bug
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Temp Setpoint Adjust Bug
Last edited by JonW on Mon Mar 07, 2011 4:58 pm, edited 1 time in total.
Re: Temp Setpoint Adjust Bug
fixed in v3.3
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Temp Setpoint Adjust Bug
I just setup v3.3 and the temp setpoint adjust screen is still showing 0 for all current temps.
Re: Temp Setpoint Adjust Bug
Hmm, I just tried it on the Demo (also running v3.3), and it seems to work. Only Temp0 is wired to a probe, and it reads correctly. But Temp1 isn't connected, so it reads zero.. Maybe i'm missing something...
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Temp Setpoint Adjust Bug
Adam - I'm happy to let you remote into my setup and check it out if you wish. It is on a static IP.
edit: also, my refrigerators are on temp 5,6 & 7, so maybe it is only working correctly for temps 0 - 3? I can plug in my stand back to the BCS tonight to check temp probes 0 to 3.
edit: also, my refrigerators are on temp 5,6 & 7, so maybe it is only working correctly for temps 0 - 3? I can plug in my stand back to the BCS tonight to check temp probes 0 to 3.
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Temp Setpoint Adjust Bug
So, it appears that maybe only Temp0 through Temp3 (first four) are working and the bug still exists for Temp4 through Temp7 (second four on 462).
In the attached pic, the outputs are as follows:
Out0 = Temp5
Out1 = Temp6
Out2 = Temp7
Out3 = Temp0
Out4 = Temp1
Out5 = Temp2
In the attached pic, the outputs are as follows:
Out0 = Temp5
Out1 = Temp6
Out2 = Temp7
Out3 = Temp0
Out4 = Temp1
Out5 = Temp2
Re: Temp Setpoint Adjust Bug
Thanks Jon. 3rd time is the charm, we'll get this fixed yet!