Is there a way to recover from an interface crash without cycling the power on the ebs 460 ?
Also, sometimes it forgets how to save changed settings, and the power needs to be cycled to restore this functionality.
Interface crash recovery
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Interface crash recovery
Can you clarify more specifically what you mean by "interface crash" and "it forgets how to save changed settings"?
I mostly only have to power cycle my BCS when I do firmware upgrades or if I'm adding/removing some wiring from it I power it down.
What firmware version are you on? Hardwired or wireless network? Which browser?
I mostly only have to power cycle my BCS when I do firmware upgrades or if I'm adding/removing some wiring from it I power it down.
What firmware version are you on? Hardwired or wireless network? Which browser?
Re: Interface crash recovery
"interface crash" = no ping but controller still running processes.
"it sometimes forgets how to save changed settings"? = hit apply, screen refreshes with old values. After power cycled, applied changes accepted as normal
What firmware version are you on? = BCS-460 v3.4.3
Hardwired or wireless network? = wired dhcp
Which browser? = was Firefox 4 now Firefox 7
"it sometimes forgets how to save changed settings"? = hit apply, screen refreshes with old values. After power cycled, applied changes accepted as normal
What firmware version are you on? = BCS-460 v3.4.3
Hardwired or wireless network? = wired dhcp
Which browser? = was Firefox 4 now Firefox 7