G'day guys im struggling here...
Im controlling a HERMS brewery, but i cant get my head around exit conditions...
firstly i have a process to heat my strike water in the HLT
state 1: Heat strike
state 2: Transfer strike
I can get the water up to temp and it starts to transfer into the rest of the system, BUT... im not using float levels to end the transfer state, i just want to hit a Web Input button to kill process 1, and Begin Process 2 which begins the mashing process
but it just wont let me edit the exit conditions box
Im sure im making a rookie mistake here, but i just cant figure it out...
All i want to do is hit the Win0: button to kill current process and spawn next process
PLEASE HELP
Help with Exit conditions
Re: Help with Exit conditions
What firmware revision are you running? There was an errata in v3.4 that wouldn't allow setting Win exit conditions. Also, the win names are incorrect.
http://www.embeddedcc.com/wiki/index.ph ... and_Errata
http://www.embeddedcc.com/wiki/index.ph ... and_Errata
-
- Posts: 4
- Joined: Thu Sep 15, 2011 10:51 pm
- Bot?: No
Re: Help with Exit conditions
okay cool i have updated the firmware, wish me luck
P.S if your having trouble updating firmware, make sure you have the bcs460.bin file in a folder all on its own
P.S if your having trouble updating firmware, make sure you have the bcs460.bin file in a folder all on its own