The issue I am having is that I cannot change the Coefficients for the temp probes.
I put in the ones from Brewers hardware and hit apply and they either change back to the defaults or go to 0
I dont have the temp probes hooked up to the BCS Yet so Im not sure if this is the issue but thought I would ask.
Temp Probe Coefficients
Re: Temp Probe Coefficients
What firmware revision are you running (its on the System Settings page)
Re: Temp Probe Coefficients
Current firmware version is
BCS-460 v3.4.5
BCS-460 v3.4.5