Trouble updating from v1.3

Get help and insight.
Post Reply
uabericm
Posts: 2
Joined: Fri Mar 23, 2012 9:59 am
Bot?: No

Trouble updating from v1.3

Post by uabericm »

I have been working to update a BCS460 from v1.3 to the current firmware. I have loaded the hs_tftp_demo.exe and I have the "current directory" set to "D:\my documents\ecc" where the bcs460.bin file is located. When clicking the firmware update in system settings, I load my IP address "169.254.0.60" and nothing happens. The tftp program just states "server mode started ok". I am connected directly to the bcs460 with a WinXP laptop. Can anyone help or shed some light on something I am missing?

Thanks,

Eric
User avatar
ECC
Posts: 676
Joined: Fri Sep 12, 2008 12:29 pm
Bot?: No
Contact:

Re: Trouble updating from v1.3

Post by ECC »

One thing to try is to turn off your firewall and/or any antivirus software temporarily. They have been known to block the firmware update process.
uabericm
Posts: 2
Joined: Fri Mar 23, 2012 9:59 am
Bot?: No

Re: Trouble updating from v1.3

Post by uabericm »

I finally got it to update by hooking up a desktop that had been factory reset, so there were no extra LAN or wireless networks to contend with or security software. Thanks for the help.
Post Reply