Public 4.0 issues Resolution

Things to come.
Post Reply
User avatar
oakbarn
Posts: 846
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Public 4.0 issues Resolution

Post by oakbarn »

Please do not report issues here but only that it has been reported and there is a reply about a "bug" being looked into or that the issues is not an issue but a feature. This is so we do not bother reporting the same issue more than once.

1. Duty Cycle has issues. A review is underway. No need to report any duty cycles issues.
2. Once you click "All Stop", the State Buttons (Interactive Text) no longer work until you launch the process from the Process Side Bar. Review is underway.
3. PID Setting Output Period and Sample does not display correctly. They needed to be divided by 10 . i.e. 30 = 3.0 . You still have tenths.
4. AND in Exit Conditions is POST 4.0 (Not a bug but a request)
5. Temp Averaging may or may not be implemented. (Ver 3.x had it, 4.0 does not).
6. Digi 16 Boards not supported yet.
7. HMI not supported yet.
User avatar
oakbarn
Posts: 846
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Re: Public 4.0 issues Resolution

Post by oakbarn »

8. LED Display Saving Issue (to be fixed) (Toggle Celcius Checkbox to save until fixed)
Post Reply