BCS 4.0.0 firmware released
Posted: Mon Sep 21, 2015 5:31 pm
This post is announcing the final release version of the 4.0 firmware. This is production ready firmware ready to be used on any existing BCS device.
Please see the new user manual available at: http://docs.embeddedcc.com/
The 4.0 firmware is a complete rewrite from the 3.x series firmware. The major differences are:
NOTE THAT THERE IS A NOW A NEWER RELEASED VERSION 4.0.1
http://forum.embeddedcc.com/viewtopic.php?f=11&t=2807
Please see the new user manual available at: http://docs.embeddedcc.com/
The 4.0 firmware is a complete rewrite from the 3.x series firmware. The major differences are:
- Totally redesigned responsive UI
- REST / JSON based API to make developing for the BCS much easier
- Some functionality has been moved out of the firmware to utility application suite
- Data Logging re-imagined to make it easier for 3rd party logging applications to log data, but on-device logging is more minimal
- No Manual Mode or HMI. HMI is planned for a future release, at this time there is no plan for Manual Mode to return.
- Remove 20/30s reset options
- Set duty_cycle to 0 when below pulse_width_min, instead of using pulse_width_min as a floor. fixes #190
- Fix din debounce after all stop is issued. fixes #189
- Allow authentication when using CORS requests. Do not require authentication for OPTIONS request and allow Authorization header in CORS requests.
- Update ladder logic after updating outputs. closes #200
- Replaced link to wiki with link to new manual.
- Added a link to the BCS Utilities from the settings page.
NOTE THAT THERE IS A NOW A NEWER RELEASED VERSION 4.0.1
http://forum.embeddedcc.com/viewtopic.php?f=11&t=2807