Timer Values with th e Process Display Box

Things to come.
Post Reply
User avatar
oakbarn
Posts: 846
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Timer Values with th e Process Display Box

Post by oakbarn »

I am not sure, but I thought that the Timer Values were retained in the Process Display Box when you had it set to display "Always" and then killed the Process. It seems in 4.0.1 that they automatically revert to Zero rather than what they were.
AlwaysTimer.png
AlwaysTimer.png (18.87 KiB) Viewed 7510 times
JonW
Site Admin
Posts: 1726
Joined: Sun Jul 18, 2010 7:51 am
Bot?: No
Location: Huntington Beach, CA
Contact:

Re: Timer Values with th e Process Display Box

Post by JonW »

I don't recall if that was a known behavior change between 4.0.0 and 4.0.1. You can always flash 4.0.0 and test it and report back. ;)
User avatar
oakbarn
Posts: 846
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Re: Timer Values with th e Process Display Box

Post by oakbarn »

Same in 4.0. I would like to request this as it would help in keeping track . The Last Values on Kill would be nice as you could then track them after the fact. The Timers Reset at the Start of a State regardless. While a Process is Running, I know that if a Timer is not used in the Next State, it does retain its value. When I can, I leave my State 7 as "Take Readings" that does basically nothing so I can log the Timers, but sometimes I need all 7 States.

BTW, I had ZERO issues reflashing. I think I finally have it down.
Post Reply