Things to come.
-
JonW
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
-
Contact:
Post
by JonW »
oakbarn wrote: ↑Sat Apr 21, 2018 9:51 am
Since the I2C is a Pin Connector, does it provide the 12 vdc + and - ?
Yes. You can use the 5 pin jumpers to attach LED displays and power them through the jumper. Much easier connectivity for external external expansion.
For the new end caps, I'll see if I can get an ETA on those.
-
Ryanryates
- Posts: 5
- Joined: Wed Aug 12, 2015 1:55 pm
- Bot?: No
Post
by Ryanryates »
Hey Jon -
Can you tell me if the 482 can input data from a flow reader? I use a couple in my current setup to monitor run off rates.
Thanks.
-
JonW
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
-
Contact:
Post
by JonW »
Ryanryates wrote: ↑Tue May 01, 2018 6:05 am
Can you tell me if the 482 can input data from a flow reader? I use a couple in my current setup to monitor run off rates.
No, the BCS does not interface to flow meters.
-
JonW
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
-
Contact:
Post
by JonW »
For anyone in need of the thinner end caps, please contact Brewers Hardware as they have them in stock and will mail you one.
-
vv2080
- Posts: 25
- Joined: Thu Mar 15, 2018 1:02 pm
- Bot?: No
Post
by vv2080 »
BCS Backup Utility does not work on BCS482 unit. It's saying Backing up.... and not moving on...
-
JonW
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
-
Contact:
Post
by JonW »
vv2080 wrote: ↑Thu May 03, 2018 10:47 pm
BCS Backup Utility does not work on BCS482 unit. It's saying Backing up.... and not moving on...
It's a known bug and being worked on.
-
vv2080
- Posts: 25
- Joined: Thu Mar 15, 2018 1:02 pm
- Bot?: No
Post
by vv2080 »
JonW wrote: ↑Fri May 04, 2018 8:01 am
vv2080 wrote: ↑Thu May 03, 2018 10:47 pm
BCS Backup Utility does not work on BCS482 unit. It's saying Backing up.... and not moving on...
It's a known bug and being worked on.
Thanks!
-
oakbarn
- Posts: 846
- Joined: Thu Jan 05, 2012 2:28 pm
- Bot?: No
- Location: Texas
-
Contact:
Post
by oakbarn »
JonW wrote: ↑Tue May 01, 2018 11:42 am
For anyone in need of the thinner end caps, please contact Brewers Hardware as they have them in stock and will mail you one.
I think that the screws holding the plate is a Trox T-10 star bit which you can get at Lowes or Home Depot.
-
vv2080
- Posts: 25
- Joined: Thu Mar 15, 2018 1:02 pm
- Bot?: No
Post
by vv2080 »
JonW wrote: ↑Fri May 04, 2018 8:01 am
vv2080 wrote: ↑Thu May 03, 2018 10:47 pm
BCS Backup Utility does not work on BCS482 unit. It's saying Backing up.... and not moving on...
It's a known bug and being worked on.
When is the next release and fix of this bug scheduled?
Thanks!
-
JonW
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
-
Contact:
Post
by JonW »
vv2080 wrote: ↑Mon May 07, 2018 3:02 pm
When is the next release and fix of this bug scheduled?
Thanks!
The bug isn't in the 482, it's in the backup/restore utility. I don't have a date, but I know it's is being looked at.