Page 9 of 9

Re: BCS-482 Specifications (replacement for BCS-460/462)

Posted: Wed Jan 23, 2019 1:11 pm
by darkagesstout
I am really stuck. I had a problem with my 462. I sent it in and when I got it back, I had a different version of firmware. (4.1.2) I have a config file that looks like it was made with version 4.0.1. So I downgraded the firmware of the 462 to 4.0.1 and using the above link (lawn-chair.github.io/bcs-backup) I get this warning message: "Different Device Types This backup was created on a different device type. The restore will probably work fine, but there may be some settings which are not applied properly." So I try it anyway. The only thing I can see that changed is the name of the device. None of the other settings - and I have extensive programing - have transferred. HELP PLEASE!

Re: BCS-482 Specifications (replacement for BCS-460/462)

Posted: Thu Sep 24, 2020 5:20 am
by jward
JonW wrote:
Sun Apr 22, 2018 12:34 pm
oakbarn wrote:
Sat Apr 21, 2018 9:51 am
Since the I2C is a Pin Connector, does it provide the 12 vdc + and - ?
Yes. You can use the 5 pin jumpers to attach LED displays and power them through the jumper. Much easier connectivity for external external expansion.
How many of the LED displays can one safely run from the BCS I2C connector with each pulling 150mA?

Re: BCS-482 Specifications (replacement for BCS-460/462)

Posted: Tue Jan 12, 2021 8:51 pm
by BREWMASON
The PIDs have been discontinued :(