I've tried the link and it's still working for me.
Only the last link is still valid, the earlier ones have been removed as there were problems with the program.
Here's the link again:
https://docs.google.com/folder/d/0B3hDP ... U4aEU/edit
Let me know if you still have problems and I can attach the files to an email.
Better Probe Calibration technique
Re: Better Probe Calibration technique
Last edited by bbrally on Mon Sep 17, 2012 9:15 am, edited 1 time in total.
Move, copy, clear proc/states: http://manipulator.from-ca.com/
Perform coeff. mods: http://calculator.from-ca.com/
HMI latest ver: http://bbrally.altervista.org/guibeta/i ... r=01042020
Perform coeff. mods: http://calculator.from-ca.com/
HMI latest ver: http://bbrally.altervista.org/guibeta/i ... r=01042020
Re: Better Probe Calibration technique
Got it, thanks. I must've been using an old URL. Very nice app, btw. This will be a huge time-saver.
-
- Posts: 383
- Joined: Wed Feb 09, 2011 3:43 pm
- Bot?: No
- Location: Clearwater, FL
- Contact:
Re: Better Probe Calibration technique
I never had the desire to be within a tenth of a degree... then today I decided to calibrate an annoying temp that was reading higher than the one closer to the heat source. what a simple program... Thank you SO much! (oh, I was doing it in C and wondering why it only moved half the way... then doh! I switched to F and did it and extremely happy)
they should send you a free BCS in exchange for implementing your program into the BCS for 5.0
they should send you a free BCS in exchange for implementing your program into the BCS for 5.0