My version of the HMI builder

Applications that run on PC/Mac.
User avatar
bbrally
Posts: 199
Joined: Sat Mar 27, 2010 3:59 am
Bot?: No
Location: Vancouver, BC or NST, Thailand
Contact:

Re: My version of the HMI builder

Post by bbrally » Sun Feb 25, 2018 4:39 pm

I found a computer this afternoon and can confirm that this is now fixed. Thanks again for pointing this out.

I like the look of your new canvas, I think it's cleaner and easier to follow.

I looked at your old canvas and you had no loops. Loops as this program sees them are when the lines are connected via their end points (red circles) and form a loop.

So in the picture below, the left has no loops where the right does.


loops.jpg
loops.jpg (140.04 KiB) Viewed 755 times
Move, copy, clear processes/states: http://manipulator.from-ca.com/
Perform coefficient mods: http://calculator.from-ca.com/
HMI Builder: http://bbrally.altervista.org/GUI/index.html
HMI Builder latest ver: http://bbrally.altervista.org/guibeta/index.html

Timbrew
Posts: 32
Joined: Sat Jun 29, 2013 2:40 pm
Bot?: No
Location: Kent, UK

Re: My version of the HMI builder

Post by Timbrew » Tue Feb 27, 2018 12:25 pm

Thanks - all clear. Once again congrats for making this brilliant GUI available to the public - all my friends have admired it so so much, not least because it brings the BCS to life! I look forward to seeing any future enhancements and hopefully mainstreaming in support of the BCS.

User avatar
bbrally
Posts: 199
Joined: Sat Mar 27, 2010 3:59 am
Bot?: No
Location: Vancouver, BC or NST, Thailand
Contact:

Re: My version of the HMI builder

Post by bbrally » Wed Feb 28, 2018 7:35 am

I've been working on new features.... taking forever as they involved big changes to the code. Probably a couple more months till its ready.

New notes object - content unique to every state
New timer object
All non-plumbing objects now assignable to states
Current state information now condensed and contained within a single "pane"
Multiple draggable current state "panes" - allows the display of more than one running process at a time
Draggable BCS window - allows full screen canvas if desired
Move, copy, clear processes/states: http://manipulator.from-ca.com/
Perform coefficient mods: http://calculator.from-ca.com/
HMI Builder: http://bbrally.altervista.org/GUI/index.html
HMI Builder latest ver: http://bbrally.altervista.org/guibeta/index.html

Timbrew
Posts: 32
Joined: Sat Jun 29, 2013 2:40 pm
Bot?: No
Location: Kent, UK

Re: My version of the HMI builder

Post by Timbrew » Wed Feb 28, 2018 1:48 pm

Cool. FYI, one edit function I'd thought might be useful especially when laying out a new canvas or editing an existing, would be to enable some form of 'group' shifting of objects -somewhat like in Powerpoint- to maintain relative positions or facilitate formatting - even to move the whole design into a better position. This would just be icing on the cake though. Keep up the good work!

SavageBullBrewery
Posts: 2
Joined: Mon Feb 12, 2018 12:06 pm
Bot?: No

Re: My version of the HMI builder

Post by SavageBullBrewery » Mon Mar 05, 2018 3:37 pm

I think your site is down for the HMI.

User avatar
bbrally
Posts: 199
Joined: Sat Mar 27, 2010 3:59 am
Bot?: No
Location: Vancouver, BC or NST, Thailand
Contact:

Re: My version of the HMI builder

Post by bbrally » Tue Mar 06, 2018 5:47 am

They are loading OK for me right now. Perhaps there was a problem with the server when you tried.
Move, copy, clear processes/states: http://manipulator.from-ca.com/
Perform coefficient mods: http://calculator.from-ca.com/
HMI Builder: http://bbrally.altervista.org/GUI/index.html
HMI Builder latest ver: http://bbrally.altervista.org/guibeta/index.html

User avatar
oakbarn
Posts: 780
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Re: My version of the HMI builder

Post by oakbarn » Sat Apr 14, 2018 8:28 pm

First glance: Works with BCS 482 :o

User avatar
bbrally
Posts: 199
Joined: Sat Mar 27, 2010 3:59 am
Bot?: No
Location: Vancouver, BC or NST, Thailand
Contact:

Re: My version of the HMI builder

Post by bbrally » Sat Jun 30, 2018 4:55 pm

I finally finished version 0.10.1.

New notes object - content unique to every state
New timer object
All non-plumbing objects now assignable to states
Current state information now condensed and contained within a single "pane"
Multiple draggable current state "panes" - allows the display of more than one running process at a time
Draggable BCS window - allows full screen canvas if desired
Object grouping now possible for deletion or movement of multiple objects

http://bbrally.altervista.org/guibeta/index.html

I plan to start on a proper help next. The current one is outdated and not very useful anyway.
Move, copy, clear processes/states: http://manipulator.from-ca.com/
Perform coefficient mods: http://calculator.from-ca.com/
HMI Builder: http://bbrally.altervista.org/GUI/index.html
HMI Builder latest ver: http://bbrally.altervista.org/guibeta/index.html

User avatar
oakbarn
Posts: 780
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Re: My version of the HMI builder

Post by oakbarn » Mon Jul 09, 2018 6:23 am

Love the new bottom!!
latest.png
latest.png (105.19 KiB) Viewed 357 times

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests