Interesting to see the datalog option: records up to 128 readings and then over writes with the 129th reading probably since the BCS was turned on or the datalog reset.
1st # is the sequence #
(Frequency set by the Data Log Settings for each channel; options: 1 second; 1 minute, 2 minutes, 5 minutes, 10 minutes, 30 minutes, 1 hours)
2nd # is the temperature.
Data log Frequency setting = amount of data before rewriting happens:
1 second = 2 minutes 13 seconds
1 minute = 2 Hrs 8 minutes
2 minutes = 4 Hrs 16 minutes
5 minutes = 10 hrs
10 minutes = 21 hrs
30 minutes - 64 hours
1 hrs - 128 hrs
http://192.168.1.122/api/datalog/1
[[129,478],[130,478],[3,478],[4,478],[5,478],[6,478],[7,479],[8,479],[9,478],[10,478],[11,478],[12,478],[13,478],[14,478],[15,478],[16,478],[17,478],[18,478],[19,478],[20,479],[21,479],[22,478],[23,479],[24,479],[25,479],[26,479],[27,479],[28,479],[29,479],[30,478],[31,478],[32,479],[33,479],[34,478],[35,478],[36,478],[37,478],[38,478],[39,478],[40,479],[41,479],[42,479],[43,479],[44,478],[45,478],[46,478],[47,478],[48,478],[49,478],[50,478],[51,478],[52,478],[53,479],[54,479],[55,479],[56,479],[57,479],[58,479],[59,479],[60,479],[61,479],[62,478],[63,478],[64,478],[65,478],[66,478],[67,479],[68,479],[69,479],[70,479],[71,479],[72,479],[73,478],[74,478],[75,478],[76,479],[77,479],[78,478],[79,478],[80,478],[81,479],[82,479],[83,478],[84,479],[85,479],[86,479],[87,478],[88,479],[89,478],[90,478],[91,478],[92,478],[93,478],[94,478],[95,478],[96,478],[97,478],[98,478],[99,478],[100,478],[101,478],[102,478],[103,478],[104,477],[105,478],[106,478],[107,478],[108,478],[109,478],[110,478],[111,478],[112,478],[113,478],[114,478],[115,478],[116,478],[117,478],[118,478],[119,478],[120,478],[121,478],[122,477],[123,479],[124,478],[125,478],[126,477],[127,478],[128,478]]