I have the BCS Desktop app working on a Pi but kept getting the error "Check BCS Credentials or network connection!" when doing a "Get BCS Config". I have it set to the lowest poll interval (300ms) and I always get the error at around the /api/output/14 mark.
I am using a wifi thing to give the pi and bcs wireless connection to my network. I decided to test the network so I hard wired the BCS to my router and am now running BCS desktop on my Windows 7 pc which is also hard wired. I still get the same error at the same time.
Here's the error:
Here's my network config:
Another issue: When running BCS Desktop on my Win7 machine I get the temp's showing properly, when running on the pi (wheezy) I do not get temperatures. I am using the same config file on both.
BCS Desktop App (V 0.5.0) for Windows, Linux, Mac & Rpi
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: BCS Desktop App (V 0.5.0) for Windows, Linux, Mac & Rpi
Can you reset the BCS config and retrieve the default setup to see if you still get that error?
I'm wondering if there are some garbage characters in the return data that is causing some type of corruption.
I'm wondering if there are some garbage characters in the return data that is causing some type of corruption.
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: BCS Desktop App (V 0.5.0) for Windows, Linux, Mac & Rpi
If you enable customization mode on the Pi, do you see them there?vince805 wrote:Another issue: When running BCS Desktop on my Win7 machine I get the temp's showing properly, when running on the pi (wheezy) I do not get temperatures. I am using the same config file on both.
Re: BCS Desktop App (V 0.5.0) for Windows, Linux, Mac & Rpi
I did a "Reset to defaults" on the bcs460 and then went to BCS Desktop and did "Get BCS Config" and it gave me the error again.JonW wrote:Can you reset the BCS config and retrieve the default setup to see if you still get that error?
I'm wondering if there are some garbage characters in the return data that is causing some type of corruption.
I see the labels, yes, but there is no data showing up on them (on the pi).JonW wrote:If you enable customization mode on the Pi, do you see them there?.
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: BCS Desktop App (V 0.5.0) for Windows, Linux, Mac & Rpi
What version of the exe are you running?
Can you send me a copy of your configs? I'll PM you an e-mail address.
Can you send me a copy of your configs? I'll PM you an e-mail address.
Re: BCS Desktop App (V 0.5.0) for Windows, Linux, Mac & Rpi
0.5.3, just let me know what you would like me to send and ill send themJonW wrote:What version of the exe are you running?
Can you send me a copy of your configs? I'll PM you an e-mail address.
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: BCS Desktop App (V 0.5.0) for Windows, Linux, Mac & Rpi
I see from your JSON backup that you're on a 460. It will be later tonight before I can test on that platform.
Re: BCS Desktop App (V 0.5.0) for Windows, Linux, Mac & Rpi
OK, thank you.JonW wrote:I see from your JSON backup that you're on a 460. It will be later tonight before I can test on that platform.
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: BCS Desktop App (V 0.5.0) for Windows, Linux, Mac & Rpi
This appears to be a bug only when using the 460. It does not appear to cause any negative side affect other than the annoying message. I'll get it fixed in a future release.vince805 wrote:I have the BCS Desktop app working on a Pi but kept getting the error "Check BCS Credentials or network connection!" when doing a "Get BCS Config". I have it set to the lowest poll interval (300ms) and I always get the error at around the /api/output/14 mark.
Re: BCS Desktop App (V 0.5.0) for Windows, Linux, Mac & Rpi
Alright, thanks for checking on that.JonW wrote:This appears to be a bug only when using the 460. It does not appear to cause any negative side affect other than the annoying message. I'll get it fixed in a future release.vince805 wrote:I have the BCS Desktop app working on a Pi but kept getting the error "Check BCS Credentials or network connection!" when doing a "Get BCS Config". I have it set to the lowest poll interval (300ms) and I always get the error at around the /api/output/14 mark.
Any idea why the bcs desktop wouldn't show updated information on the pi?