Wiring Check BCS 462
Posted: Sat Dec 29, 2012 8:50 am
advice on my build/schematic
30Amp Panel Mounted GFI
3 - 20 gal kettles
HLT and BK both have 5500W heating elements
HERMS system with the heat exchange coils in the HLT
2 march pumps
1Keezer - cool
1Ferm Chamber - Heat/Cool
BCS 462 to maintain temps and on/off for pumps
At any given time, I need to run 1 element and 2 pumps (never running both elements at the same time) as well as ferm freezer and keezer
A panel with switches for manual/auto(BCS 462)/off for each element and both pumps as well as an e-switch
Remote box - Ferm (heat 5a, cool 5a), Keezer (cool 5a), Aux
http://robertkolb.com/brew/Schematic-2.jpg
http://robertkolb.com/brew/Remote-Schematic.jpg
30Amp Panel Mounted GFI
3 - 20 gal kettles
HLT and BK both have 5500W heating elements
HERMS system with the heat exchange coils in the HLT
2 march pumps
1Keezer - cool
1Ferm Chamber - Heat/Cool
BCS 462 to maintain temps and on/off for pumps
At any given time, I need to run 1 element and 2 pumps (never running both elements at the same time) as well as ferm freezer and keezer
A panel with switches for manual/auto(BCS 462)/off for each element and both pumps as well as an e-switch
Remote box - Ferm (heat 5a, cool 5a), Keezer (cool 5a), Aux
http://robertkolb.com/brew/Schematic-2.jpg
http://robertkolb.com/brew/Remote-Schematic.jpg