Valves?
Re: Valves?
You can use the discrete inputs for float switches or a button to bump your process to the next step. Are you using the solenoid valves for fluid or for the gas?
Re: Valves?
Yeah, the base BCS-460 has 6 outputs. If you need more (for valves), you can purchase expansion cards, upto 4 each of which has an extra 12 outputs.
Re: Valves?
I will be using them for fluid. I was thinking of controlling the transfer from both my fly sparge and the transfer to the bk. I was thinking two for each step, so a total of four. I just built a float switch that will control a pump, so I can get rid of one of the pump outputs. So I should probably have to get an expansion card to to this.