Convert from pin header to screw terminal
Convert from pin header to screw terminal
I have a relay with pin control input and I would like to convert to screw terminals. There are 10 pins. I can't seem to search for the right piece. I'm sure it must exist. I'm guessing it's a green block with 10 female pin slots and 10 screw terminals. Please help. Thanks!
- Attachments
-
- 14585189019820.jpg (187.58 KiB) Viewed 6376 times
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Convert from pin header to screw terminal
You could unsolder that header and solder in some screw terminals. Search for .1" spacing terminals (2.54 mm).
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: Convert from pin header to screw terminal
Also - have you tested that board with the BCS? Does it trigger with a high input?
Re: Convert from pin header to screw terminal
My bet is that board will not work.
-
- Posts: 383
- Joined: Wed Feb 09, 2011 3:43 pm
- Bot?: No
- Location: Clearwater, FL
- Contact:
Re: Convert from pin header to screw terminal
I agree.... it will not work.. I know cause I bought one in 2011
look at the pics to match it to the above:
http://www.ebay.com/itm/271925240103
Then look at the description:
"This relay module is 5V active low."
yes, the right ones cost a few bucks more and have screw terminals.... your time spent has to be worth something!
http://www.ebay.com/itm/130579791463
Input control signal voltage:
0V - 0.5Vdc, low level, relay not action.
0.5V - 2.5Vdc, unknown state.
2.5V - 24Vdc, high level, relay action.
look at the pics to match it to the above:
http://www.ebay.com/itm/271925240103
Then look at the description:
"This relay module is 5V active low."
yes, the right ones cost a few bucks more and have screw terminals.... your time spent has to be worth something!
http://www.ebay.com/itm/130579791463
Input control signal voltage:
0V - 0.5Vdc, low level, relay not action.
0.5V - 2.5Vdc, unknown state.
2.5V - 24Vdc, high level, relay action.