Hi everyone,
Have just taken over operation of a new 7BBL system and after upgrading the glycol system I am trying to replace all the tank temperature sensors (6 x FV's, 2 x BBT's). Temp monitoring is using a BCS-462.
I'm finding that there is no product support for replacement sensors as neither of the recommended suppliers have any stock of temperature sensors.
Can anyone recommend where else I can source sensors please, without having to make my own
Preferably looking for 12" sensor length suitable for 1/4" compression fittings.
Thanks in advance,
Scott
New Temp Sensor Replacements/Support
-
- Posts: 1
- Joined: Wed Mar 14, 2018 3:07 pm
- Bot?: No
Re: New Temp Sensor Replacements/Support
Scott,
I have two 12" temp probes I bought from BrewersHardware, a few years ago that I am not using if you are interested. They have a M8 disconnect on the end of each probe.
Tom Brophy
I have two 12" temp probes I bought from BrewersHardware, a few years ago that I am not using if you are interested. They have a M8 disconnect on the end of each probe.
Tom Brophy
- Attachments
-
- IMG_7276.JPG (98.1 KiB) Viewed 12848 times
-
- IMG_7275.JPG (136.32 KiB) Viewed 12848 times
Thomas Brophy
AleForce Homebrewery
AleForce Homebrewery
-
- Site Admin
- Posts: 1726
- Joined: Sun Jul 18, 2010 7:51 am
- Bot?: No
- Location: Huntington Beach, CA
- Contact:
Re: New Temp Sensor Replacements/Support
I inquired with Brewers Hardware today on the availability and they informed me they're about 2 weeks out from being restocked on the pre-made probes. They do have all the components for making your own.