HMI Builder available in 4.0?

Using the HMI Builder and creating custom interfaces for the BCS.
Post Reply
erichter66
Posts: 5
Joined: Thu Oct 01, 2015 4:32 pm
Bot?: No

HMI Builder available in 4.0?

Post by erichter66 » Fri Oct 09, 2015 5:34 pm

Is the HMI builder still available in firmware version 4.0, or is it replaced by the APIs?

User avatar
JonW
Site Admin
Posts: 1446
Joined: Sun Jul 18, 2010 7:51 am
Bot?: No
Location: Huntington Beach, CA
Contact:

Re: HMI Builder available in 4.0?

Post by JonW » Fri Oct 09, 2015 6:58 pm

4.0 does not currently have an HMI builder.

User avatar
Wazu_Wazu
Posts: 1
Joined: Wed Dec 02, 2015 6:15 pm
Bot?: No

Re: HMI Builder available in 4.0?

Post by Wazu_Wazu » Mon Jan 11, 2016 11:07 am

Are there any thoughts to adding an HMI builder to 4.0?
There's nothing like planning. And this is, nothing like planning.

sunadmn
Posts: 3
Joined: Thu Oct 20, 2016 10:19 am
Bot?: No

Re: HMI Builder available in 4.0?

Post by sunadmn » Fri Oct 21, 2016 8:05 am

Bumping this topic since it's been well over a year since the first post and not a lot of chatter here. Will there be an HMI builder interface available in the 4.x firmware?

GORGETDISTILLINGCO
Posts: 1
Joined: Tue Dec 15, 2015 7:03 am
Bot?: No

Re: HMI Builder available in 4.0?

Post by GORGETDISTILLINGCO » Mon Nov 28, 2016 12:19 pm

Will there be an HMI builder interface available in the 4.x firmware?

User avatar
oakbarn
Posts: 659
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Re: HMI Builder available in 4.0?

Post by oakbarn » Fri Feb 17, 2017 2:05 pm


BREWMASON
Posts: 47
Joined: Thu Aug 30, 2012 4:40 pm
Bot?: No

Re: HMI Builder available in 4.0?

Post by BREWMASON » Wed Jul 12, 2017 2:20 pm

This is very cool but for fermentation the old HMI was super simple and sweet. Does anyone have the old links to the BCS-462 firmware that used the original HMI. Think it was version 3.7.1? Please let me know. Thank you in advance!!

User avatar
oakbarn
Posts: 659
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Re: HMI Builder available in 4.0?

Post by oakbarn » Sat Jul 22, 2017 6:55 pm

BREWMASON wrote:
Wed Jul 12, 2017 2:20 pm
This is very cool but for fermentation the old HMI was super simple and sweet. Does anyone have the old links to the BCS-462 firmware that used the original HMI. Think it was version 3.7.1? Please let me know. Thank you in advance!!
look at https://forum.embeddedcc.com/viewtopic. ... are#p11977

BREWMASON
Posts: 47
Joined: Thu Aug 30, 2012 4:40 pm
Bot?: No

Re: HMI Builder available in 4.0?

Post by BREWMASON » Wed Jul 26, 2017 1:09 pm

Thank you Oakbarn!!! I just ordered a BCS-462 to work with and try to master the HMI. Really struggled with it on my first attempt on someone else's. I think if I have y own to work with it will make things a lot easier. We just added another three 3bbl fermenters and the PID I replaced on our Perlick 4410 would not drop below 40. Going to test a Powerswitch tail SSR inline with the compressor so I can bring the temp down to 20 and implement some rest periods for the compressor. Playing with some ideas and fiddling with the HMI info you sent me before. Thank you very much!!!

User avatar
oakbarn
Posts: 659
Joined: Thu Jan 05, 2012 2:28 pm
Bot?: No
Location: Texas
Contact:

Re: HMI Builder available in 4.0?

Post by oakbarn » Thu Jul 27, 2017 1:48 pm

HMI GUI Fermentor2.png
HMI GUI Fermentor2.png (155.44 KiB) Viewed 313 times
This is a pix of my HMI GUI for my fermentors.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest